膨脹珍珠巖的通用指標
Properties of expanded perlite
顏色Color | White |
折射率Refractive Index | 1.5 |
自由水Free Moisture, Maximum | 0.5% |
PH (of water slurry) | 6.5 - 8.0 |
比重 Specific Gravity | 1.0-2.0 |
堆積密度Loose Bulk Density (LBD) | 80-280 kg/m3 |
粒度Size commercially available | 8 mm and finer |
軟化點Softening Point | 870-1095°C |
燒結溫度Fusion Point | 1260-1345°C |
比熱Specific Heat | 387 J/kg·K |
導熱系數Thermal Conductivity at 24°C | 0.04-0.06 W/m·K |
溶解性 Solubility | Soluble in hot concentrated alkali and HF. Moderately soluble (<10%) in 1N NaOH Slightly soluble (<3%) in mineral acids (1N) Very slightly soluble (<1%) in water or weak acids |
松銤維鉑(Americium)技術數據表
產地(Origin):信陽
項目(Item) | 單位(Unit) | 標準(Standard) | 企業標準值 (Standard Value) |
外觀 Appearance | / | JC/T 1042 | 白色顆粒 White |
堆積密度 Loose Bulk Density | Kg/M3 | GB/T 17431.2 | 100-120 |
篩分粒度 Size Distribution | % | GB/T 17431.2 | 0.12-1.0≥90 |
體積吸水率 Water absorption Rate | % | JC/T 1042 | ≤32 |
體積漂浮率 Floaters | % | JC/T 1042 | ≥96 |
導熱系數 Thermal Conductivity Index | W/m.k | JC/T 1042 | ≤0.04 |
開孔珍珠巖和?;⒅榈奈⒂^結構對比
松銤維鉑的微觀結構圖
膨脹珍珠巖的產品圖片
為什么在輕質材料中使用珍珠巖
Reasons for using perlite in LWM
Enhance thermal and acoustical insulation
增強隔熱隔音性能
Increase fire resistance 增強防火性能
Provide 4 hours of fire protection on structural steel
4小時的防火保護(建筑鋼材)
Transmit up to 75% less heat than common sand-based mixes
減少75%的傳熱量
Lower load in curtain wall constructions
幕墻的低負荷
Pozzolanic activity due to amorphous silica
無定形硅帶來的火山灰活性
膨脹珍珠巖集料的優點
Advantages of expanded perlite as aggregate in Concrete, Mortars and Plasters
Reduce density of the end-product ?less dead load on structural members
降低最終產品的密度
Enhance thermal and acoustical insulation performance of the building
增強隔熱吸音性能高
Crack resistant 防裂
Fire-proof 防火
金輝第六代松銤維鉑生產線
一次性可投放100T原材料,料倉側壁有收風口收塵,物料經過輸送帶輸送至預熱爐中,預熱爐為雙層滾筒,大筒與小筒互套在一起,物料直接進入到內筒中,通過烘干、預熱、脫水處理,處理結束后經提升機提升至膨化爐中對物料進行膨化,主爐膨化后的產品柔性回流至預熱爐中心筒經過余熱回收管理系統收集余熱后,進入金輝專利技術懸浮法五級風選(把未完全閉孔的產品分類收集),風選過后的產品進入成品倉通過輸送機提升至柔性篩分系統(把未完全膨化的燒結砂篩除掉),最終經過級配管道流入定量包裝系統進行包裝,以上程序可以保證松銤維鉑的閉孔率和漂浮率,金輝公司宗旨是以高品質產品服務于市場。